Cyklos CFM 500 Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Папероробні машини Cyklos CFM 500. Cyklos CFM 500 2 сторінки.

Marking of the main

parts of the

machine

1 – start button

2 – stop button

3 – tilting board

4 – infeed tray

5 – delivery drawer

6 – X stop

7 – Y stop

(back side)

8 – T-squares

9 – stop rider

10 – front cover

11 – back cover

3) Working process

Tilt down the feeding board 4, hold it in the lower position and feed paper on it,

then push T-squares 8 towards the paper.

After pressing the „start button" 1, paper is automatically fed from the pile and folded

into the waste box. It is necessary to remove paper from the waste box during

operation to prevent its overfilling. It is advisable to let the machine finish a folding

cycle. After the last sheet of paper is folded the machine turns off automatically.

4) Methods of folding and control of stops

Types of individual folds

Each type of paper folding requires precise setting of the stop rider 9 of the X stop 6 in

an appropriate position. The position of riders of X and Y stops can be adjusted for

various types of paper. 'Single' folding (½)requires that the Y stop is inserted in the

machine in the opposite way.

5) Troubleshooting

Paper crumpling in the machine: First both stops must be removed from the

Defective fuse replacement:

6) Dismantling of covers

Covers can be dismantled by a qualified person only and only after the machine

has been disconnected from the mains supply.

7) Machine disposal

When the service life of the machine is over, the machine is disassembled and

its parts are sorted as follows: metal, non-metal, plastic and rubber. These

parts are then handed in at the respective collecting points for further recycling.

machine and then the crumpled sheet must be

removed in such a way that the rollers turn

round spontaneously.

Disconnect the supply cable from the mains

and after dismantling the cover, replace the

fuse (F 630 mA/250V)