DoggyRide Novel Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами DoggyRide Novel. DoggyRide Novel 20 сторінок. Foldable crate / dog bike trailer / stroller
Також для DoggyRide Novel: Посібник зі встановлення та використання (8 сторінок)

Друкувати сторінку

Assemble the axle onto the wheel using the hex wrench included with

the product. There are two washers on the axle. The waved washer

should be on the trailer side and the flat washer on the bolt side.

Secure the bolt and wheel is now ready to attach to the trailer.

Flip the cabin gently on the side to connect the wheels. Push the wheel

inside the wheel opening in such a way that the opening in the axle

appears in front of the opening in the wheel holder. Push the safety pin

through the opening and flip the curled wire to secure it. (see image.)

Attach the Tow bar

Gently flip the cabin with wheels backward on its rear, and unscrew the

latch pin out of the front opening. Push the tow bar in it, in such a way

that it leans upward and to the right. Push the latch pin back into the

hole and screw it tight, then push the latch downward. The tow bar will

now be firmly attached.

Install the Hitch

The hitch needs to be installed right onto the axle. There are two

different types of axles:

Hitch installation for quick release axles

Unscrew the bolt of the skewer and the skewer out. If you keep your

bike straight the wheel should remain in the same position while taking

the skewer out. Insert the skewer through the large hitch opening and

push it into the axle. Point the hitch downward or 45 degrees down