DOGIPOT DOGIPARK PLAYGROUND FOR DOGS 7731 Специфікація та інструкція з монтажу
Переглянути онлайн або завантажити pdf Специфікація та інструкція з монтажу для Ігрові набори та обладнання для дитячих майданчиків DOGIPOT DOGIPARK PLAYGROUND FOR DOGS 7731. DOGIPOT DOGIPARK PLAYGROUND FOR DOGS 7731 2 сторінки. Fire hydrant
Друкувати сторінку
800.364.7681
SPECIFICATION AND INSTALLATION SHEET
INSTALLATION AND OPERATION INSTRUCTIONS
1 Find the desired location that is flat and accessible on all sides for dogs to enjoy the Decorative DOGIPARK
Hydrant. It is recommended to remove any sod around the Fire Hydrant so that it can be installed on a flat area
and surrounded by mulch.
2. Mark the location of the (4) four holes on the ground where the ground mount installation j-rods will be inserted into the
ground through the base of the fire hydrant.
3. Use a broom stick, tomato, ground stake or similar items to pound into the ground to create 4 holes approximately 2-3"
wide and 14" deep for the j-rods to be inserted.
4. Lay the fire hydrant on the ground sideways and slide each j-rod into each hole on the base of the fire hydrant to prepare to
install into the ground.
5
Per the directions on the bag, pour some quick setting concrete into each hole filling them up.
6. Position the fire hydrant in the installation area and slide the installed j-rods into each concrete-filled hole.
7. The j-rods may need to be swiveled back and forth gently to get them to slide all the way down into the wet concrete filled
holes If necessary, gently hammer the j-rods, into their holes. CAUTION: The powder coating on the top of the j-rods can
be chipped and damaged if the top of the j-rods are not covered with a soft item if hammered. Proceed slowly and tap
gently to ensure they are not damaged. The fire hydrant will need to set and cure per the directions on the quick setting
concrete that was used.
8. It is recommended to surround the fire hydrant with a wood mulch to create a buffer so the landscapers maintaining
the area do not hit the fire hydrant with a lawnmower or weed trimmer and so that there is no grass immediately around it
that will be destroyed by the dog urine that likely will increase in the area due to the presence of the fire hydrant.
9. The Decorative DOGIPARK
hardware has NOT be included and the j-rods will not be necessary for this type of installation. CAUTION: DO NOT
OVERTIGHTEN any surface mounting hardware. This may damage the base of the fire hydrant.
WARNING: THIS IS A DECORATIVE FIRE HYDRANT TO ADD CHARACTER TO YOUR DOG PARK AND FOR DOGS TO ENJOY.
IT IS NOT DESIGNED FOR PEOPLE TO CLIMB OR STAND ON. THIS COULD DAMAGE THE FIRE HYDRANT AND INCREASE
THE CHANCE OF INJURY. DO NOT CLIMB, SIT, LEAN OR STAND ON THE FIRE HYDRANT AT ANY TIME.
DOGIPOT
TELESCOPING POST (ITEM 1301-P)
PLAYGROUNDS FOR DOGS
®
FIRE HYDRANT (ITEM #7731)
YOUR
PLAYGROUNDS FOR DOGS DECORATIVE FIRE HYDRANT INCLUDES:
• 1 Red decorative fire hydrant
• 4 Red powder coated in-ground mounting J-rods
PLEASE CHECK THE ABOVE INVENTORY AND CALL YOUR DISTRIBUTOR IF ANY PARTS ARE MISSING.
Fire Hydrant may also be surface mounted instead of ground mounting. Surface mounting
®
www.DOGIPARK.com
™
Fire
®