1010 Music Bluebox Посібник із швидкого старту - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Музичний мікшер 1010 Music Bluebox. 1010 Music Bluebox 4 сторінки. Eurorack edition compact digital mixer
Друкувати сторінкуADJUST OUTPUT LEVELS AND SET OUTPUT OPTIONS
Push MAIN to control the output levels.
PHONES
Control the level sent
to the PHONES out.
3 & 4
If 3&4 Mode is Stereo,
controls OUTS 3 & 4.
If 3&4 Mode is Mono,
controls OUT 3.
Push MAIN then B to configure the output options. The table below is a partial list of options.
Output
Option
Phones Srce
USB Rcv
3&4 Mode
3&4 Send
FX1 & FX2 Send
Compressor
MANAGE PROJECTS
The bluebox stores all of your settings and the collection of WAV recordings as a project on the
microSD card. Recorded WAV files will stay with your project, but you must save the project if
you want other changes to persist.
To Save the Current Project:
1. Push PROJ.
2. Touch Save.
To Manage Project Settings:
1. Push PROJ, then push B.
2. Use a top knob to select a parameter and a
bottom knob to change it's value.
3. Touch the tabs across the bottom to access
MIDI and CV settings.
Copyright 2023 by 1010music LLC
B
Push to configure output
options like those in table.
Description
The signal to send to the PHONES output.
Which tracks will receive the USB Audio Stream.
Choose how outputs 3 and 4 are used.
Control whether the corresponding signal levels are sent
pre- or post-fader.
Is the compressor applied to the MAIN bus.
See the User Manual for the full list options
Mute
Touch to mute the
output.
To Manage Projects:
1. Push PROJ.
2. Touch File.
3. Touch the file option you want: New,
SaveAs Template, or Rename.
To Load a Different Project:
1. Push PROJ.
2. Turn a knob to select a project.
3. Touch Load. Note: Load is disabled for the
currently loaded project.
1&2
Controls the level
sent to OUT 1 & 2.
4
Controls the level
sent to OUT 4.
Values
CUE, Main
None, 1&2 thru 11&12
Stereo, Mono
Pre-Fader, Post-
Fader
On, Off
Page 3