1010 Music Bitbox Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Синтезатор 1010 Music Bitbox. 1010 Music Bitbox 11 сторінок.
Також для 1010 Music Bitbox: Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

The

In1

and

room (a few dB) between your loudest level and the max allowed, which is 0dB.

7. Touch the on-screen

synchronized with other modules by using the

input. (See Synchronize Clips with CLOCKS or MIDI Inputs below.)

8. Touch the on-screen

9. Press the HOME button to return to the Main screen.

Synchronize Clips with CLOCKS or MIDI Inputs

To synchronize the playback of clips with a clock signal, a MIDI clock source or the internal clock, follow these

steps:

1. Use the

Clip Info

the cell. Bitbox synchronizes clips when

Quant Size: 1 bar

2. Plug a clock source into the CLOCK jack or a MIDI clock source into the MIDI jack. You should hear all

clips play synchronized with the CLOCK input or MIDI signal, according to the parameters set up for each

clip.

Note:

The Clock input must use 4 pulses per quarter (PPQs), or a pulse per 16

§

If MIDI and CLOCK inputs are used together, Bitbox will select the highest priority clock based on

§

the following order of priority: 1.) CLOCK Input; 2.) MIDI Input; 3.) Internal Clock.

Modulating Cells

The dark gray cells on the rightmost column of the Main screen work differently from

the other 16 cells. These cells are used to control modulation of the row of cells to the

right of the modulation cell. These modulation cells work with the CV Modulator

input jacks below the screen. To adjust modulation, select a dark gray cell and press

INFO to display the

Mod Cell

Use the Control Knobs to adjust the three parameters on the

Mod

This selects the type of modulation for the corresponding row of cells. The values include:

Scene Trig

P. 7

v. 1.0

In2

values display the levels of each of the input signals. For best results leave some

Rec

button. Bitbox will start recording. The timing of the recording can be

Stop

button. The recording will end.

and

More Clip Info

Quant Size

screen shown to the right.

Triggering this modulation with the CV Modulator input will trigger the

entire row of cells at once. This is similar to the Scene Triggers in Ableton Live.

Rec Quant

parameter setting with a MIDI or CLOCK

screens to set the

is set to something other than

Mod Cell

Bitbox User Manual

Trigger

and other parameters for

None

note.

screen:

, such as