Dogtra 2700T&B Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Dogtra 2700T&B. Dogtra 2700T&B 19 сторінок. 1-dog system only training & beeper collar

Друкувати сторінку

the auto charger, plug into a cigarette lighter only for

lithium polymer batteries (use a 230 volt European

charger for Europe). All indicator lights should glow

red when properly plugged in and the unit will

automatically shut off during the charging process.

You will need to turn the unit on again before use

once the unit is fully charged and unplugged from the

battery cable.

3. The lithium polymer battery is fully charged within

2 hours. The lights will stay red during the charging

process. The red light will turn green once the unit is

fully charged.

4. After charging, cover the battery charging receptacles

with the rubber plugs on the transmitter and receiver.

11. Handheld Transmitter LCD

The LCD screen indicates the stimulation level on the

screen ranging from (0-127). The battery life indicator

shows: 3 bars = full charge, 2 bars = medium charge, and

1 bar = needs charge.

When pressing the Mode button, the selected beeper

volume level is shown on the LCD (Note: Pressing the

Mode button once will also set the unit in the Run/Point

mode). When the toggle switch is set on low pitch the

LCD will read: L1= lowest volume, L2 = medium volume

and L3 = highest volume. When the toggle switch is set

on high pitch, the LCD will read: H1 = lowest volume,

H2 = medium volume and H3 = highest volume.

Care for LCD Transmitters in Cold Temperature

In cold temperatures (10°F or below), the Liquid Crystal

Display (LCD) on your transmitter may be dim or slow to

respond. Wait until the display becomes visible before

selecting any training level. Even though the LCD screen

might be dim or slow to respond when you push the

Nick or Constant button, the transmitter will still function

properly. In the occurrence of extremely cold weather,

the LCD screen might take a moment to respond causing