Dogtra CUE Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Dogtra CUE. Dogtra CUE 19 сторінок. Remote dog training collar system

Друкувати сторінку

NOTE 3: When a charger is not in use, disconnect it from

the power source. Fully charge the batteries if the unit is to

be stored without use for a period of 3 months or more.

Follow the steps below to charge your system:

1. Open the rubber plugs on the battery charging

receptacles and plug in the charging cable.

2. Plug the charger into a 120-volt wall outlet or, if using

the auto charger, plug into a cigarette lighter only for

lithium polymer batteries (use a 220 volt European charger

for Europe). All indicator lights should glow red when

properly plugged in and the unit will automatically shut

off during the charging process. You will need to turn the

unit on again before use once the unit is fully charged and

unplugged from the battery cable.

3. The lithium polymer battery is fully charged within 2

hours. The lights will stay red during the charging process

and turn green once the unit is fully charged.

4. After charging, cover the battery charging receptacles

with the rubber plugs.

Recharging is required when:

- The LED on the LED on the receiver is red

- The LED on the receiver is not illuminated

- Only one battery status bar remains on the Transmitter

LCD screen

- 'Lo' appears on the transmitter LCD screen

- The transmitter or receiver does not work when the button

is pressed in continuous stimulation mode

GENERAL TRAINING TIPS

Your dog must know some basic obedience commands

before beginning training with the CUE. A dog learns by

first being shown a command, followed by lots of repetition

over an extended period. As the dog becomes proficient at

these commands, the trainer can introduce distractions and

different locations to strengthen the commands.

Obedience Training on the Leash

Your dog must fully understand the obedience commands

(sit, stay, here, heel, and kennel) before using the e-collar

for reinforcement of these commands. A leash attached

to a standard collar is used to "teach" the dog the basic

obedience commands (here, heel, sit, and stay). A tug

on the leash/collar is used to reinforce the command.

When the dog complies with the command, use positive

reinforcement/praise. Once the dog understands these

commands, the e-collar can be used to reinforce them.

Beginning E-Collar Training

When you feel your dog understands the obedience

commands on the leash we can now start with the e-collar

training. With the dog on the leash and wearing the e-collar,

continue with your obedience drills. Apply light stimulation

(Nick or Constant) when a command is given; the

stimulation can be removed as the dog complies. Through

repetition, the dog learns to perform the command.