Dogtra iQ NO BARK Посібник

Переглянути онлайн або завантажити pdf Посібник для Засіб для догляду за домашніми тваринами Dogtra iQ NO BARK. Dogtra iQ NO BARK 2 сторінки. No bark collar
Також для Dogtra iQ NO BARK: Посібник користувача (14 сторінок)

Друкувати сторінку

OVERVIEW

Please read this manual thoroughly before using the iQ NO BARK.

PRODUCT SAFETY AND HEALTH STATEMENT

1. The iQ NO BARK is intended to prevent the barking of dogs only. It is NOT

intended for use on people or on animals other than dogs. Dogtra does not

assume any liability for the improper use of the iQ NO BARK.

2. Leaving the iQ NO BARK in the same position on a dog's neck for extended

periods of time can cause skin irritation. To prevent this, occasionally reposition

the unit so the contact points are moved to a different location on the dog's neck.

Always check your dog's neck for signs of skin irritation when using the iQ NO

BARK.

3. A proper fit is necessary for the iQ NO BARK to work optimally. Both contact

points must be in contact with your dog's skin at all times for a consistent

stimulation. A loose fitting collar can cause the contact points to rub against the

skin and cause irritation.

4. The iQ NO BARK is not intended for use on dogs weighing less than 10 pounds or

less than 6 months of age. Please consult a veterinarian if attempting to use the

iQ NO BARK on dogs smaller than the recommended weight.

5. Please remove the iQ NO BARK before playing with your dog. The activity may

cause your dog to bark, which could lead him/her to associate playing with the

electrical stimulation.

6. Closely monitor your dog's activity and stimulation output while using the iQ NO

BARK. When removing the iQ NO BARK from your dog's neck, make sure your

dog is not barking and in a calm or stable condition.

PACKAGE CONTENTS

iQ NO BARK

Detachable

Two Batteries

Owner's

Receiver

Strap

(3V CR2032)

Manual

MAIN FEATURES

- Fully waterproof receiver/collar

- Medium output receiver/collar

- 10 intensity levels on receiver/collar

- Ultra-compact receiver/collar

- Conductive plastic contact points

- Bark recognition sensor

- Learning vibration system

- For dogs as small as 10 lbs

- Replaceable coin lithium batteries included

DESCRIPTION

Conductive Plastic

Contact Points

②

LED Indicator

Light

① On/Off &

Intensity Dial

Bark Recognition

Sensor

Battery Cover

Detachable Strap

USING THE ON/OFF & INTENSITY DIAL (refer to ①)

- The On/Off & Intensity Dial on the collar is used to turn the iQ NO BARK on and off,

to select the intensity level, and to test the collar.

- Set the On/Off & Intensity Dial to the ". " position to turn off the iQ NO BARK.

- When the dial is set to the Pager mode (P), the collar will only vibrate.

- Level 1 is the lowest stimulation level with level 10 being the highest. On each

level, a vibration is followed by the stimulation.

- Set the On/Off & Intensity Dial to the Test mode (T) to Test the iQ NO BARK.

See the Testing Guide for directions on how to test the iQ NO BARK.

On/Off & Intensity Dial

Function

Power off

Vibration only (non-stimulation)

1~10

Vibration followed by stimulation

Test mode

NOTICE

When first using the iQ NO BARK, it is recommended that you start

with the lowest level. If the dog continues to bark, gradually increase

the intensity level. Closely monitor your dog's reaction to find the right

stimulation level.

LED INDICATOR LIGHT (refer to ②)

The LED indicator light will flash for 1 second when the iQ NO BARK has been turned

on, and will blink every 3 seconds afterwards. If your dog does not bark for over 10

seconds, the LED indicator light will turn off and the iQ NO BARK will go into a sleep

mode to conserve battery life. It will reactivate when your dog barks and a vibration/

correction needs to be made.

OPERATION MODES

1. Pager vibration mode

- Turn the intensity dial to P.

- When your dog barks the iQ NO BARK will vibrate twice.

2. Stimulation levels 1-10

- Stimulation levels from 1 to 10, with 1 being the lowest level and 10 being the

highest level.

IQ NO BARK ACTIVATION

- When the iQ NO BARK is first activated by the dog's bark, the unit will give a

vibration twice.

- If the dog barks within 4 seconds, the system will give one vibration and then

stimulation.

- The iQ NO BARK will have a delay of 15 seconds in between corrections. Once the

unit activates, it will not activate again for 15 seconds.

TESTING THE IQ NO BARK

- Turn the On/Off & Intensity Dial to (T), for the Test mode. The LED indicator light

will flash once then flash every 3 seconds.

- Activate the collar by making sounds directly into the mic. The unit should now

vibrate twice. After waiting 15 seconds, repeat the test once more to verify that it is

fully functional.

*In the Test mode, the sensor may be sensitive enough so that it can easily activate

by a quiet sound, tap, or blow into the mic.

ATTACHING THE COLLAR STRAP

Pull the strap around the

body of the iQ NO BARK in

the direction shown.

Hold strap

here

1. With the On/Off &

2. Pull the collar strap

3. Be sure that the collar

Intensity Dial going in

from the opposite side

strap is wrapped fully

first, insert the body of

of the On/Off &

around the body of the

the iQ NO BARK

Intensity Dial over the

iQ NO BARK.

into the collar strap.

rest of the body.

* For video instructions on how to attach the collar strap, please visit