Dogtra PATHFINDER TRX Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами Dogtra PATHFINDER TRX. Dogtra PATHFINDER TRX 19 сторінок.
Друкувати сторінку
2. BUTTON FUNCTION
* The GPS receiver pairing mode is used to pair the GPS receiver and the GPS
connector. The PATHFINDER MINI set comes with both parts paired to each
other.
10
GPS Connector
The Select button is used to turn the
connector on/off and select a device
to pair. While turned on, press the
Select button once to set pairing to the
GPS receiver, press the Select button
a second time to set pairing to the
smartphone app.
The Connect button is used to connect
the GPS connector to a smartphone
and GPS receiver.
Pairing: Use the Select button to set
the GPS connector to receiver to pair
the connector with the receiver. Set
the GPS connector to Phone to pair the
connector to a smartphone.
Press and hold down the Connect
button until the LED blinks rapidly.
The GPS connector will now be ready
for pairing.
GPS Receiver
Power On: To turn the GPS receiver on,
press the Power button until the green
LED turns on.
Power Off: To turn the GPS receiver off,
press the Power button until the LED
turns off.
Pairing: To place the GPS receiver into
pairing mode, begin with the device
turned off and hold down the Power
button until the LED blinks rapidly.
A melody will play when the GPS
receiver is in pairing mode.
3. CHARGING THE PATHFINDER MINI
Fully charge the PATHFINDER MINI GPS connector and GPS receiver before the
first use. The PATHFINDER MINI uses lithium polymer batteries.
• Only use official Dogtra chargers with the PATHFINDER MINI.
• Do not charge the PATHFINDER MINI near flammable substances.
• Fully charge the PATHFINDER MINI if storing for 1 month or longer.
When to Charge
• When the LED is red on the GPS connector or GPS receiver.
• When the PATHFINDER MINI app displays a low battery percentage for the
GPS connector or GPS receiver.
• When the LED on the transmitter or receiver will not come on.
• When the indicator light turns on momentarily, but will not stay on when the
Constant button is pushed.
How to Charge
1. Connect the charger to the GPS connector and GPS receiver using the splitter
cable.
2. Plug the charger into a 120-volt outlet.
3. When fully charged, detach the cables and plug the rubber caps over the
charging ports on the GPS connector and GPS receiver.
4. The GPS receiver turns off and cannot be used while charging. The GPS
connector functions while being charged. The LED will display red while
charging and green when the unit is fully charged. The GPS connector LED
will be green when turned on while charging. A depleted battery requires 2.5
hours to fully charge.
11