Cload WP-8 Посібник з монтажу - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з монтажу для Музичне обладнання Cload WP-8. Cload WP-8 16 сторінок. Headphone stations
Друкувати сторінкуConnecting an external amplifier and/or speakers
The WP-8 is provided with additional outputs, which can be used to drive
external low-power loudspeakers directly, active loudspeakers or the line
inputs of an external amplifier. Both stereo and mono configurations are
possible.
Connections are made to the 6-way screw-terminal block
PCB. The pinout of this connector block is as follows:
PIN
MARKED
1
0V
2
L+
3
L+
4
0V
5
R+
6
R+
Note that both 'switched' and 'permanent' outputs are available. The switched
outputs are wired internally via switch contacts on the front panel headphone
10
WP-8 Installation Guide
CHANNEL
LEFT
RIGHT
5
PURPOSE
Output – (0 V)
Switched output +
Permanent output +
Output – (0 V)
Switched output +
Permanent output +
on the rear