Dogtra ARC Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Автомобільні аксесуари Dogtra ARC. Dogtra ARC 12 сторінок. Handsfree kit
Також для Dogtra ARC: Посібник користувача (16 сторінок), Посібник з експлуатації (14 сторінок)

Друкувати сторінку

2. ARC HANDSFREE Code Setting Guide

Coding the transmitter and receiver:

1. Turn the transmitter on by pressing the on/off button and set the

Rheostat Dial to 0.

2. With the receiver turned off, place the red dot on the back of the

transmitter to the red dot on the receiver. Hold the two red dots

together for about 5 seconds until the green LED blinks rapidly on

the receiver.

3. While the green LED is rapidly blinking on the receiver, separate

the two devices and press the two side buttons (Nick & Constant)

simultaneously on the transmitter. The LED light on the receiver will

blink every 4 seconds when coding is complete.

Coding the transmitter and HANDSFREE Remote Controller:

1. Begin with the transmitter turned off.

2. On the handheld transmitter, hold down the following buttons until

you see a rapidly blinking light to code the desired function on the

HANDSFREE Remote Controller.

Constant = Hold down the on/off button and the Constant

Pager = Hold down the on/off button and the Pager

Nick = Hold down the on/off button and the Nick

3. Once you see the rapidly blinking light, release the buttons.

4. Hold down the HANDSFREE Remote Controller button until the

rapidly flashing light on the transmitter and controller both show a

solid light.

5. Release all buttons. To check if the coding is correct, press the

button on the HANDSFREE Remote Controller.