Akrobat GRASSHOPPER Посібник з встановлення та експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Спорт & на свіжому повітрі Akrobat GRASSHOPPER. Akrobat GRASSHOPPER 16 сторінок.

Друкувати сторінку

Attaching the frame pad

Lay the safety pad on top of the trampoline, aligning the pad section joints with the joints of the frame and

the eyelets facing up. Insert the elastic toggles through the eyelets so the loop end of the tie faces outwards

and the toggle end is on the inside.

Flip the frame pad over and pull the elastic

band around the frame. Insert the toggle into

the loop, then rotate the toggle inwards to

secure it. Repeat with all frame pad elastics.

Important:

The frame pad must cover the

entire frame and all springs.

Secure the frame pad to the trampoline by

placing springs into the "spring loops". You will

find them on the underside of the frame pad

where each pad section joins the next one.

Remove a single spring under every loop, slip

it through the loop and reattach to the frame.

Repeat with all loops. This will prevent the

front of the pads from lifting up.

When the frame pad is securely attached to

the frame, insert the fiberglass rods through the

sleeve on the mash skirt attached to the pad.

Pull each fiberglass rod through its fitting

sleeve and attach the matching ends together

with aluminium junction parts. Finally, push the

final two corresponding rods together into a

circle, ensuring that the mash skirt is evenly

stretched.

Important:

Attaching the fiberglass rods can

require a little force, therefore we

recommend two people to do this.