DogWatch System 1200 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами DogWatch System 1200. DogWatch System 1200 12 сторінок. System
Також для DogWatch System 1200: Посібник з монтажу (10 сторінок), Інструкція з експлуатації Посібник з експлуатації (16 сторінок), Інструкція з експлуатації Посібник з експлуатації (9 сторінок)
Друкувати сторінку
1200
SYSTEM
Status Light
The status light on your System 1200 receiver provides these features.
•
Start-Up When you first insert the battery, the status
light will flash red and green. This indicates that the
receiver has started properly. Once started, the status
light will continue to flash green once every 40 seconds
indicating normal operation. In the event that the light does not
flash, check the battery to be sure that it has been inserted properly.
•
Training Level Indicator When programming the training level of your receiver,
the status light will flash green in conjunction with audible beeps. The number of
flashes/beeps will equal the training level you have chosen.
•
Signal Field Indicator When testing the receiver in the signal field, the status
light will flash green when the receiver collar is in the audible zone and will flash
red and green when the receiver collar is in the correction zone.
•
Battery Indicator This feature monitors the voltage level of the battery. Once the
receiver collar detects that the battery has reached a low voltage level, the status
light will change from blinking green every 40 seconds to blinking red every 10
seconds. This indicates that your battery is close to the end of its useful life and
you should change the battery within the next 3-4 days.
Setting the Receiver Levels
The System 1200 receivers have
Your DogWatch Dealer will start the training on the appropriate level according to your
dog's personality and traits. As training continues and your dog adjusts to the Hidden
Fence, the settings may need to be adjusted.
If you need to change the training level on the receiver, hold the magnet on your Multi-
Tool to the training level adjustment location on the side of the receiver (as shown
below). Hold the magnet steady and you will hear a series of beeps that indicate
the current training level. The training level will begin to advance while the magnet is
held in position. When you reach the desired setting, pull the magnet away from the
receiver.
"Audible Only" = 1 long beep
Level 1 = one short beep
Level 2 = two short beeps
Level 3 = three short beeps
Level 4 = four short beeps
Use the magnet on the multi-tool to set the training level on the receiver.
When the magnet activates the receiver, the number of beeps indicates the
current training level. As long as the magnet is held in place, it will advance
through the training level settings in the order shown above. (Note: Any magnet
will activate the receiver.)
Multiple Dogs: The System 1200 allows you to select a different training
level for each receiver collar on the system so you can have a different level
for each dog.
RECEIVER COLLAR FEATURES
4
levels of correction
6
Status Light
plus Audible Only.
Multi-Tool