Aseptico Sealant Express ADU-08SXE Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пилосос Aseptico Sealant Express ADU-08SXE. Aseptico Sealant Express ADU-08SXE 4 сторінки.
Друкувати сторінку
SEALANT
DESCRIPTION:
Aseptico quality make a winning combination with the ADU-08SXE Sealant
Express Delivery System. The ADU-08SXE is secured in a rugged injection
molded case and features an air/water syringe, high volume vacuum system,
self contained water system, a filter/dryer, and a single handpiece control.
Please read the instructions provided below to receive the best and longest
service from your Aseptico equipment.
SET-UP:
The ADU-08SXE unit may be set-up independently or clamped to
a table or counter top.
1. Unpack the ADU-08SXE unit, and set on a table top.
2. Open the unit case and remove the Quick Grip bar clamp.
3. Position the unit close to the edge of the table top. Expand Quick Grip
bar clamp, position over bottom edge of unit case and under the edge of
the table, then ratchet trigger to compress and secure unit to table.
4. Fill plastic water bottle with clean water and screw into top mount beneath
the unit control.
5. Remove Air Vacuum System Assembly from case and insert male quick
disconnect into air receptacle on the side of
the case. Hang hose end in holder on the
front of the unit.
6. Place handpiece hose and air/water
syringe into the proper holder on
the front of the unit. Place the disc
foot control in a comfortable position
on the floor.
7. Extend 1/4" grey air supply line with
quick disconnect and plug into the
AA-74 compressor, or a clean
50-100 PSI compressed air supply.
8333 216th Street SE • Woodinville, WA 98072
OPERATION INSTRUCTIONS
Performance, portability, and value combined with
Aseptico, Inc.
P .O. Box 1548 • Woodinville, WA 98072
(425) 487-3157
www.aseptico.com • [email protected]
P/N: 420555 • Rev. G • ECO 13997 • 11/2016
Printed in U.S.A.
ADU-08SXE
(800) 426-5913