CYMEDICA Orthopedics QB1 Короткий довідник - Сторінка 2
Переглянути онлайн або завантажити pdf Короткий довідник для Медичне обладнання CYMEDICA Orthopedics QB1. CYMEDICA Orthopedics QB1 2 сторінки. Knee brace
Також для CYMEDICA Orthopedics QB1: Посібник користувача (2 сторінок), Короткий довідник (2 сторінок), Короткий довідник (2 сторінок), Посібник користувача (10 сторінок), Посібник користувача (7 сторінок)
Друкувати сторінку
PROFESSIONAL-ATHLETE REHABILITATION FOR EVERY PATIENT
The Cymedica Orthopedics QB1
designed to provide professional-athlete level
rehabilitation at home. The QB1 strengthens
the quadriceps muscle following ACL,
reconstructive knee surgeries, and may also be
used to treat the non-surgical knee injury.
Let us get you back to your
active life as soon as possible!
The following guide is a basic summary of usage
instructions. Please consult with your physician prior
to use and refer to cymedicaortho.com/patients for
full instructional videos and additional information.
1. FITTING THE
GARMENT & BRACE
aligned with your anatomy (as shown below).
Remove the electrode covers.
system is
™
Electrode Positioning
Wrap the garment around the top of your thigh and
loosely secure it. Follow the same procedure with
the calf panels.
Bend the knee and ensure the hinges align with
your knee. Adjust accordingly and tighten into final
position. Verify that the brace's bars are located on
the sides of the leg.
Sit on the floor with the
garment under your
affected leg and the pre-
positioned electrodes
= electrode placement
Secure Garment Ends
Identify and wrap all strap
2. SECURE
connections on the outside of the
BRACE
brace. Make sure all straps are tight
to prevent slippage.
If indicated by your physician:
Extend leg fully
and engage slide locks on either side of the brace
to immobilize your leg in full extension. Visit
cymedicaortho.com/patients for more detailed
instructions.
If indicated by your physician:
Set range of motion
limits using hinge dial on either side of brace. Visit
cymedicaortho.com/patients for more information.
Align Hinges