CYMEDICA Orthopedics QB1 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни CYMEDICA Orthopedics QB1. CYMEDICA Orthopedics QB1 7 сторінок. Knee brace
Також для CYMEDICA Orthopedics QB1: Посібник користувача (2 сторінок), Короткий довідник (2 сторінок), Короткий довідник (2 сторінок), Короткий довідник (2 сторінок), Посібник користувача (10 сторінок)

Unlocking the knee Brace

Fully extend your leg and move the Slide Lock on both Brace hinges. Carefully, retract the Slide Lock to

ensure it is completely removed from the mating slot on the hinge.

5.2

Instructions for Operating the QB1 Knee Brace

The QB1 knee Brace can be used to limit or lock out the flexion and extension range of motion of the

knee. Each Brace has an independent hinge on both sides of the knee joint. The Hinge Dial is used to

adjust the extension and flexion range of motion of its associated hinge. The Extension Limit can be set to

-15° (hyperextension) or from 0° to 90° in 15° increments. The Flexion Limit can be set from 15° to 135°

in 15° increments.

NOTE: The Brace Hinge Dials on both sides should always be adjusted to the identical settings prior to

use.

Setting the QB1 Knee Brace Extension and Flexion Limits

Removing the Extension Limit

Rotate the hinge dial towards the EXTENSION setting until the Locking Disc pops out and

releases the Extension Limit.

Setting the Extension Limit

Rotate the hinge dial to the desired EXTENSION setting and push in the Locking Disc firmly until

seated.

Removing the Flexion Limit

Rotate the hinge dial towards the FLEXION setting until the Locking Disc pops out and releases