ASG BLG-5000 Series Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Викрутка-шуруповерт ASG BLG-5000 Series. ASG BLG-5000 Series 17 сторінок. With built in screw counter, with built in screw counter and pulse system, for use with screw counter
Також для ASG BLG-5000 Series: Посібник з експлуатації (7 сторінок)
Друкувати сторінку2. By using the serial communication. ⇒ Send the message "SL¥n" from your PC or PLC.
■ Messages received from PC or sequencer (Inquiry or Setup command)
No.
1 All functions availability
2 Cycle count
3 Min. Motor Revolutions
4 Max. Motor Revolutions
5
Work Reset Timer
6 Reverse count Timer
7 System
8 Over Time - Short Time
9 Panel Buttons availability
10 No error time for double fastening
11 Version
12 Total number of the driver shut off (Torque Up)
13 Unlocking screwdriver
14 Request to send set value
■ Messages to receive from I/O interface unit (event messages)
No
Function
1
Detecting presence of work parts
2 Panel Buttons availability
3 Cycle count
4
Error Reset
5 Lever control availability
6 Emergency Stop
■ Messages sent to PC or PLC (response messages to inquiries and setting)
No
Function
1
All functions availability
2
Cycle count
3
Min. Motor Revolutions
4
Max. Motor Revolutions
5
Work Reset Timer
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
HIOS BLG Series: BLG-BC2
Operational Manual
Function
Message
W:0 / W:1 W:0 without work
So: 0 / So:
R: C
R: E
Lv:0 /
Lv:1
Em:0 /
Em:1
Response
AP:0 / AP:1
4/5
| Phone: (
44110-3898
888) 486-6163
Inquiry
Setup command
command
QP
SP:0 available
SP:1 unavailable
Qn
Sn:x x = setup value *1
Qc
Sc:x x = setup or learned value *1
QC
SC:x x = setup or learned value *1
Qt
St:x
x = setup value *1
Qr
Sr:x
x = setup value *1
Qd
Sd:x x = setup value *1
QU
SU:x x = setup value *1
Qo
So:0 ON /
So:1 OFF
QG
SG: No error time : (0～99)
resolution: 100ms
QV
none
QL
none
None
SL
QS
none
Meanings
W:1 with work
So:0 available
1
So:1 unavailable
Forcibly clear the count and the operation
time for reset
Reset the driver after detecting absence of a
work part.
Lv:0 available
Lv:1 unavailable
Em:0 cancellation of stop
Em:1 emergency stop
Remarks
message
0: available
1: unavailable
An: x
x: setup value *1
Ac: x
X: setup or learned value *1
AC: x
X: setup or learned value *1
At: x
X: setup value *1
BC2 Communication 1510-E HIOS Inc.
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com
216) 481-4519