Cyndar Electronic Technology HL-1607 Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Вимірювальні прилади Cyndar Electronic Technology HL-1607. Cyndar Electronic Technology HL-1607 14 сторінок. Safety edge sensor
Друкувати сторінку
1. Safety edge Product profile
Safe contact edges are flexible bending bands or circles. It can be fixed to dangerous edges of moving parts
such as tire molding, lift safety doors, machine workbench and electric doors. When the moving components
hits the operator or the moving components, these flexible safety edges are compressed and transmitted to
the power source has stopped this movement of these components. Safety edge contacts should work with
the controller to form a flexible and universal emergency stop system, where the robot operator and
installer must be able to easily conveniently stop the towing device. A complete safety contact edge includes
an aluminum guide to a safety contact and a built-in inductive signal band (contact band) ° special shape
(rubber side) protects the safety contact band from damage and allows an impact angle of more than 90 °.
The product has many specifications and sizes, and the customer can customize the length according to the
requirements after selecting the specifications. It is widely used in AGV trolleys, welding robots, packaging
machinery, automation equipment, automatic balancing vehicles, electric doors, etc.
Suitable for various applications, low trigger pressure, and a variety of specifications.
The length of the sensor is 200mm-6000mm.
It can be bent and is suitable for various mechanical protection occasions.
Protection grade IP65, suitable for use in various situations.
More than 3 million cycles of mechanical service life.
The jacket is made of EPDM rubber, resistant to various chemical corrosion, suitable for
Use in general conditions and civil occasions.
The maximum length of a control area (including link cables) should not be less than 100
square meters
Not suitable for fast-moving machines to protect against injuries
Safety edge sensor use case
Safety sensors installed on hazardous moving parts for contact detection are used in combination
with special controllers to meet PLe/ Safety Level 3.
(Suitable for occasions with internal safety relays that can directly prohibit the operation of
dangerous sources)
The simple and integrated structure integrates the sensor and the original cover. Resistance to
lateral forces. Can be used in multiple
27mm〜80mm
2. Selection table of safety edge technology
applications.Sensor length: 150mm〜6,100mm, Height:
Regular type
3