ASG 65258 Посібник користувача - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент ASG 65258. ASG 65258 13 сторінок. Digital torque and angle wrench
Друкувати сторінку
Modes of Operation
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
TAW Series Digital Torque Wrenches
Torque and Angle Model
User Manual
Set Mode
This mode allows the user to set limits for 1. Torque, 2. Torque and Angle or 3. Just Move.
The operator can choose to set torque values by % or tolerance. During operation the
OLED display will be green when approaching the pre-set tolerance and will change to red
if exceeded.
The user can choose from the following Set Modes:
•
Set Torque
•
Set Torque & Angle
•
Set Just Move Pre-Set
Set Mode − Torque:
Step 1: Press
to scroll to Set Mode
Step 2: Press
to select Set Mode
Step 3: Press
Step 4: Press
Step 5: Press
to confirm pre-set number selected
Step 6: Press
Step 7: Press
Step 8: Press
Step 9: Once the parameters have been confirmed the operator can find the task within
Pre-Set Mode. Use
| Phone: (
| Fax: (
44110-3898
888) 486-6163
to scroll to set by % or set by tolerance
to scroll to required pre-set number (i.e.1 to 99)
to set nominal value and
to set your low value and
to set your high value and
to select Pre-Set Mode from the main menu to find the task
| Email: [email protected] | Web: www.asg-jergens.com
216) 481-4519
to confirm
to confirm
to confirm
Page 9 of 13