ASG BTL-05 Інструкція з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент ASG BTL-05. ASG BTL-05 2 сторінки. Dc 20/30 v
Також для ASG BTL-05: Посібник користувача (3 сторінок)

Друкувати сторінку

Output Torque/Adjust Dial

User can adjust output

torque range of the tool via

changing the torque spring.

Please refer to the torque/

dial table and then turn the

"torque adjusting nut" to

set the proper dial for each

model of machine and set

to the desired torque for

operations.

Torque Adjusting

Nut

BTL-10

Adjusting Torque

• The dials on the electric screwdriver do not represent the

torque value

• Please use the torque/dial table to set the proper dial

for each different machine type and set to the desired

torque for operations

• Actual torque output should always be verified with a

torque tester, such as the ASG DTT series

Soft Start Adjustable Time Setting Switch

The BTL-05, BTL-10 and BTL-15 brushless electric screwdrivers

possess Soft Start adjustable time setting switch. User can set

the machines to start from lower speed for 0.2 - 4.0 seconds

and then switch to full speed operating automatically.

BTL-05

With five levels to choose: 0.0sec/0.5sec/1sec/2sec/4sec

BTL-15

Carefully take off the tag

from its side, and user can

see a small square opening

as the picture shows.

The adjustable switch is at

the corresponding position

inside the square opening.

See the red circle on the

right picture.

Turn the switch separately

to set the time of Soft Start

Power Supply

Switching Power Supply

BTL-5A (65710)

• The BTL-05, BTL-10 and BTL-15 brushless electric

screwdrivers can be used with switching power supply

BTL-5A (65710)

• The electric screwdriver connects to the power supply

with 5P connecting wire

• Insure that the power supply is connected at 90-240V

50/60Hz, and turn on the power

• By turning the HI/LOW switch, user can adjust the speed

of the electric screwdriver

• When using the PS-55 power supply, the screw counter

STC-02 and Soft Start feature will not function