ASG BTL-10 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент ASG BTL-10. ASG BTL-10 3 сторінки. Dc 20/30 v
Також для ASG BTL-10: Інструкція з експлуатації (2 сторінок)
Друкувати сторінкуRegular Simple Maintenance
ON/OFF Switch
5P
Connector
Forward/
Reverse Switch
Trigger
Torque Dial
Torque
Adjusting
Bits Holder
Nut
Collar
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
BTL Series Electric Screwdrivers
BTL-05, BTL-10, BTL-15
User Manual
Check to see whether all the parts, shell, and power lines are intact all the time to ensure normal
operations. Unplug the power plug and turn off the power before doing any maintenance
operation to ensure safety. For every 1000 hours operation or half year, the following cleaning
and maintenance operations to the machine body and the inside are required.
ON/OFF Switch
ON/OFF Switch is on the head
of the electric screwdriver
Output Torque/Adjust Dial
User can adjust output torque range of the tool via changing the torque spring. Please refer to
the torque/dial table and then turn the "torque adjusting nut" to set the proper dial for each
model of machine and set to the desired torque for operations.
BTL-05
Adjusting the Torque
•
The dials on the electric screwdriver do not represent the torque value
•
Please use the torque/dial table to set the proper dial for each different machine type and
set to the desired torque for operations
•
Actual torque output should always be verified with a torque tester, such as the ASG DTT
series
| Phone: (
| Fax: (
44110-3898
888) 486-6163
Torque Adjusting
Nut
BTL-10
| Email: [email protected] | Web: www.asg-jergens.com
216) 481-4519
BTL-15
Page 2 of 3