Clone and copy TX NEW CLONER Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Пульт дистанційного керування Clone and copy TX NEW CLONER. Clone and copy TX NEW CLONER 15 сторінок.

Друкувати сторінку

Frequencies below 433 MHZ are forbidden in Europe. They are only allowed in countries where they are authorized and don't

belong to the EU. Any handling or use of these frequencies are at buyer's responsibility.

In compliance with DIRECTIVE 2014/53/EU

MANUFACTURED BY /FAB: ESB06450563

ATTENTION: IN TX NEWCLONER (MULTICLONER) YOU CAN PROGRAMME A

DIRECT ENTRY MODE IN THE RECEIVER

PROGRAMMING INSTRUCTIONS

1. Locate the selector DIP inside the remote. Lever to separate the case

using the tab on lower side of the remote (see image below).

2. Select the DIP combination for the chosen brand. Go to table 1.

3. The remote is ready to be used. Please refer to your receiver's user

manual.

NOTE: To programme BFT, MUTANCODE and ERREKA it will be necessary to press the hidden button (with a

clip) before pressing any remote's button (button 1 to 4).

DS008 TX NEW CLONER

MANUAL TX NEW CLONER

HIDDEN

BUTTON

ATTENTION, THIS REMOTE WORKS IN TWO DIFFERENT MODES:

1. DIRECT ENTRY INTO THE RECEIVER

2. CLONE

FREQUENCY

IN EACH BUTTON (CHANNEL) ONLY IN

TECHNICAL FEATURES

ü Model TX NEWCLONER

ü 1 battery 2032(3V)

ü Frequencies 433,92 to 900 MHz

ü 4 Channels

ü Special chip

ü Software New Cloner patented

DIFFERENT BRAND AND

CLONE MODE