CYNTEC TFP-21-S-148-A Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Адаптер CYNTEC TFP-21-S-148-A. CYNTEC TFP-21-S-148-A 11 сторінок.

Друкувати сторінку
CYNTEC CO., LTD.
乾坤科技股份有限公司
乾坤科技股份有限公司
乾坤科技股份有限公司
乾坤科技股份有限公司
7. Life Test
Item
Vibration
Electrical characteristics shall be
within specification
Without distinct damage in appearance
Shock
Electrical characteristics shall be
within specification
Without distinct damage in appearance
Bending Test
Electrical characteristics shall be
within specification
Without distinct damage in appearance
Solder strength 9.8 N minimum
Solderability of
90% terminations is to be soldered
Termination
evenly and continuously.
Specification
DOCUMENT : RFB00000
REVISION
PAGE
Condition
(1) Vibration Frequency:10 Hz to 55 Hz
to 10 Hz/min
(2) Vibration shall be applied in x, y, and
z direction respectively for 2 hours
(total 6 hours)
(3) Amplitude:1.5 mm
(1) Peak value: 980N
(2) Duration of pulse: 6ms
(3) X1,X2,Y1,Y2,Z1,Z2 for
(18 times in total)
Mount on test board with bend with 3 mm
deflection for 30 seconds
JIS C 5102 8.11.1
Test Board
Component
Solder
Within ±2mm
45
50
20
Pressure rod
R230
Apply pushing force at 0.5 mm/s until
electrode pads are pealed off or ceramics are
broke
The entire sample shall be dipped in solder
at 230 5℃ for 2 0.5 seconds
: A0
: 4 OF 11
3
times each
45
Amplitude
3mm
Unit : mm