CYP AU-1H1DD-4K22 Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Конвертер мультимедіа CYP AU-1H1DD-4K22. CYP AU-1H1DD-4K22 16 сторінок. Hdmi audio de-embedder with dolby digital & dts decoder (4k, hdcp2.2, hdmi 2.0)
Друкувати сторінку
3
L/R OUTPUT: Connect to the analogue line level input of an amplifier
or active speakers.
4
COAX OUTPUT: Connect to the digital optical input of an AV receiver.
5
OPTICAL OUTPUT: Connect to the digital coaxial input of an AV
receiver.
6
HDMI AUDIO BYPASS/2CH: Use this switch to select the audio format
of the HDMI output. Switch to 'BYPASS' to allow the audio to pass-
through from the HDMI input port; switch to '2CH' to enable audio
decoding and LPCM 2CH down-mixing of Dolby Digital or DTS audio
signals from the HDMI audio source.
7
SPDIF BYPASS/2CH: Use this switch to select the audio format of the
Coaxial and Optical outputs. Switch to 'BYPASS' to allow the audio
to pass-through from the HDMI input port; switch to '2CH' to enable
audio decoding and LPCM 2CH down-mixing of Dolby Digital or DTS
audio signals from the HDMI audio source.
8
EDID STD/TV: Use this switch to select the EDID mode, 'STD (Standard)
mode' or 'TV mode' . When in 'TV mode' , the unit will automatically
detect and store the EDID settings of the display connected to the
HDMI output. If there is no picture or a distorted image, please switch
to 'STD mode' which will use video up to 1080p at 60Hz and audio up
to LPCM 2CH at 48kHz, Dolby Digital 5.1CH and DTS 5.1CH.
9
SERVICE: For manufacturer use only.
10
DC 5V: Connect the adaptor included in the package to AC wall outlet
for power supply.
9