Cloos Arc Flash 4 evo Інструкція з експлуатації Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Зварювальне приладдя Cloos Arc Flash 4 evo. Cloos Arc Flash 4 evo 16 сторінок. Welding helmet
Також для Cloos Arc Flash 4 evo: Інструкція з експлуатації та перелік запасних частин (20 сторінок)
Друкувати сторінку
WARNING!
6
2. Safety
2.1 Proper use
The device is only to be used for the following purpose:
The device affords reliable protection for the eyes whilst electric arc
welding. It offers permanent protection against UV/IR rays, heat & sparks
in any state from the clear to dark.
The welding helmet can be used for the following applications:
• Electrode
• MIG
• Mag
• Tig
The welding filters operate well under extreme low lighting and very
strong sunlight.
Risk from improper use!
Any use of the device other than the intended purpose can lead to hazard-
ous situations.
• The device should normally only be used in accordance with the infor-
mation in this document, in particular with respect to compliance with
the application limit values given in the technical specifications.
• Refrain from any use of the device which differs or extends beyond
these limits.
• Do not convert, retrofit or otherwise alter the structure or individual
fitted components with the aim of altering the scope of application or
usability of the device.
Claims of any kind for damages caused by improper use are excluded.
2.2 Reasonably foreseeable misuse
The device is intended exclusively as protection for the eyes against UV/IR
rays, heat & sparks in any state from the clear to dark whilst arc welding.
They are not suitable for use with laser systems and oxy-acetylene (gas
welding) applications. The welding filter must not be used for any other
purpose other than welding. They should never be used as sunglasses
when driving as this could lead to incorrect identification of the colour of
traffic light.
2.3 Personnel requirements
Work may only be performed by a trained specialist. All personnel involved
must be instructed with regard to the safety requirements, safety regula-
tions and operational instructions which must be applied in their work.