Asgard Secure Store Інструкція з монтажу

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Газонна та садова техніка Asgard Secure Store. Asgard Secure Store 3 сторінки.

SECURE STORE

BASE INSTRUCTIONS

Flat and firm base. Recommended: concrete, tarmac or paving flags.

Min. distance from walls/ shrubbery: 1000mm.

Min. base size (WxDxH) 1600mm x 1000mm x 50mm.

LEVELING THE UNIT

Correctly level the constructed unit using the shims (ZCOMPPLAS)

provided prior to fixing the unit to the ground. Slide the packing pieces

under the corners of the unit base as required until an equal gap has

been achieved around the door allowing for its smooth operation and

alignment.

Warning: panels weigh over 20Kg

Beware of manual handling

Drill through the four holes in the base of the unit using 6mm dia masonry

drill to a depth of 70mm. Screw in the anchor fixings. (These have a self

cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE

BUILDING to seal the fixing holes from underneath.

TOOLS REQUIRED

Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm

socket spanner and all weather sealent suitable for steel and concete.

For maintenance instructions of this product visit www.asgardsss.co.uk

Warning: Please keep

YOUR UNIQUE

this key card safe! Refer

KEY CODE

to if replacement key is

required.