CYP CPRO-SE2DD Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Конвертер мультимедіа CYP CPRO-SE2DD. CYP CPRO-SE2DD 16 сторінок. Hdmi audio converter with dolby digital/dts 2.0 plus digital out decoder
Також для CYP CPRO-SE2DD: Посібник з експлуатації (14 сторінок)
Друкувати сторінку
6.2 Rear Panel
HDMI IN
1
1
HDMI IN: Connect from source equipment such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2
HDMI OUTPUT: Connect to HDMI TV/display or HD Amplifier for
output image and or audio display.
3
L/R OUTPUT: These slots are to connect with analog output speaker
through banana jack cables for audio signal output from HDMI.
4
COAX OUTPUT: This slot is to connect with digital output speaker
through Coaxial cable.
5
OPTICAL OUTPUT: This slot is to connect with digital output speaker
through optical cable
6
HDMI BYPASS/2CH: HDMI BYPASS/2CH: For the HDMI output port,
switch to BYPASS to allow audio pass-through from HDMI input port;
switch to 2CH to enable audio decoding and 2-channel down-
mixing for Dolby Digital or DTS audio signals from HDMI input port.
SPDIF BYPASS/2CH: For the COAX and OPTICAL output ports, switch
7
to BYPASS to allow audio pass-through from HDMI input port; switch
to 2CH to enable audio decoding and 2-channel down-mixing for
Dolby Digital or DTS audio signals from HDMI input port.
8
USB: This slot is reserved for firmware update use only.
9
DC 5V: Connect the adaptor included in the package and
connect to AC wall outlet for power supply.
OUTPUT
HDMI
L
R
2
2
HDMI
BYPASS/
BYPASS/
2CH
COAX
OPTICAL
4
5
6
SPDIF
SERVICE
2CH
DC 5V
7
8
9
4