CYP OR-HD88HC Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Матричний комутатор CYP OR-HD88HC. CYP OR-HD88HC 20 сторінок. V1.4 hdmi 8 x 8 matrix switcher with simultaneous hdmi & cat outputs

Друкувати сторінку

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

8X8 HDMI MATRIX CMSI-8H8HC

LCM Display: Displays the setting information of each input and

output selection.

Power Button LED: Press this button to power the device on/off.

The LED will illuminate green when the power is on, red when it is in

'Standby' mode.

LOCK: Press this button to lock all the buttons on the panel, press

again to unlock.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button once to select EDID setting from STD (internal)

1 or TV (external) 2 then press it again to confirm the selection. Press

this button everytime to confirm the selection.

1~8/A~H and OUT/IN Buttons: Press the Out or In button to select

the output or input mode then press the required number button to

make the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2 then the following sequence of button

presses need to be performed

Press: Out  A  B  C  D  In  1  Menu,

and then press: Out  E  F  G  H  In  2  Menu.

Note: If the menu button is not press the selection will not be changed.

POWER

LOCK

OUT