Ashcroft ZT12 Інструкція з монтажу та обслуговування - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу та обслуговування для Передавач Ashcroft ZT12. Ashcroft ZT12 7 сторінок. High purity transmitter

Друкувати сторінку

Installation and Maintenance Instructions

for ZT12 High Purity Transmitter

OUTLINE DRAWINGS: MVF -

¼ VCR

) Male Fixed

Ø 1.00

[25.4]

.50

Ø 0.79

[12.6]

[20]

.32

[8.2]

2.61

[66.3]

1.86

[47.2]

.63

[16]

.87

[22]

OUTLINE DRAWINGS: MVS -

¼ VCR

) Male Swivel

Ø 1.00

[25.4]

0.50

[12.6]

0.32

[8.2]

1.86

3.69

[47.2]

[93.7]

2.29

[58.2]

0.63

[16]

Ø 0.79

[20]

All sales subject to standard terms and conditions of sale. ZT12_Transducer_I&M011-10307_RevA_11-16-22

⁄

-18 UNF (compatible with

.18

[4.5]

M12X1 - 4 PIN

ELECTRICAL

TERMINATION

⁄

-18 UNF

(compatible with ¼ VCR

Male Fixed (MVF)

⁄

-18 UNF (compatible with

0.18

[4.5]

M12X1 - 4 PIN

ELECTRICAL

TERMINATION

⁄

-18 UNF

(compatible with ¼ VCR

Male Swivel (MVS)

5. PRECAUTIONS FOR USE

5.1 Transportation Precautions

This is a precision measuring instrument.

Do not drop or impact when transporting as

CAUTION:

shock may cause damage and render the

instrument inoperable.

5.2 Unpacking Precautions

•Check packaging appearance prior to unpacking.

• Carefully handle and do not drop unit carton.

• Open instrument's sealed bag in a clean

environment. Do not expose Pressure

CAUTION:

Transmitter's gas contact parts to moisture,

dust, etc.

• Upon unpacking, inspect unit to verify that

)

the model type and physical appearance are

correct and free from damage.

• Contact distributor or Ashcroft if any

abnormality has been identified with the

product.

5.3 Installation Precautions

(1) ZT12 pressure transmitter is equipped with a union

connection that is compatible with a VCR fitting. For

installation, make sure to use hexagonal flats to tighten

fitting. Do apply force to the unit enclosure when attached

to the pressure line.

(2) This product has protection class IP67 (connector mat-

ing state/JIS C 0920).

For longer-term operation, select a location that is not

exposed to direct sunlight, condensation, dust, oil or water. In

addition, please pay particular attention to the following during

installation.

• Do not drop or impact unit as shock may

render

• Do not install product in an environment

exposed to vibration, impact, direct sunlight

or dust.

• Use product in ambient temperatures

between

• Allow for space around the instrument for

)

maintenance and adjustment.

• Do not touch or breathe on the gas contact

parts, while taking care not to damage the

Indicates that incorrect use may result in

service injury or loss of life.seat surface.

CAUTION:

• Do not apply excessive force to the

enclosure during installation.

unit inoperable.

-4° to 158°F (-20° to 70°C)