CYP CH-2605TXV Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Передавач CYP CH-2605TXV. CYP CH-2605TXV 20 сторінок. 4k uhd+ hdmi over hdbaset 2.0 transmitter (pd) with hdr/arc
Друкувати сторінку6.2 Rear Panel
RS-232
BYPASS
1
1
RS-232 BYPASS Port: Connect to a PC, laptop or serial controllable
device for the extension of RS-232 signals between both ends of
the HDBaseT connection.
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
2
from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
IR IN Port: Connect to an IR Extender to extend the IR control
range of devices connected to the other end of the HDBaseT
connection. Ensure that the remote being used is within direct line-
of-sight of the IR Extender.
3
OPTICAL OUT Port: Connect to powered speakers or an amplifier
for digital audio output using an appropriate optical cable. The
audio is sourced from either the Optical Audio Input port or ARC of
a connected compatible Receiver.
OPTICAL IN Port: Connect to the optical audio output of a device
such as a media player or game console using an appropriate
optical cable. Audio is sent to the Optical Audio Output on a
connected compatible Receiver.
CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver
4
with a single Cat.5e/6/7 cable for transmission of all data signals.
48V PoH will also be supplied when connected to a compatible
PSE Receiver.
HDMI IN Port: Connect to HDMI source equipment such as a media
5
player, game console or set-top box.
6
LAN Port: Connect to an Ethernet supporting device or to your
local network, as appropriate, to extend the network to both ends
of the HDBaseT connection.
5
IR
OPTICAL
OUT
IN
OUT
IN
2
3
CAT5e/6/7 OUT
HDMI IN
4
5
LAN
6