Dolby Laboratories DP591 Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Конвертер мультимедіа Dolby Laboratories DP591. Dolby Laboratories DP591 9 сторінок. Object authoring tool
Також для Dolby Laboratories DP591: Посібник із швидкого старту (19 сторінок)
Друкувати сторінку
Procedure
To start up the system, press the power button.
Results
The unit starts up in approximately one minute.
6 Checking the IP address
Use the front-panel navigation buttons to check the IP address of your DP591 unit.
Procedure
1. In the DP591 front panel, press the back button until the user-control screen displays the unit
name and encoding parameters.
2. Press the right or left arrow button to navigate to the CMD Interface screen.
Results
The user-control screen of your DP591 unit displays this network information:
•
IP: The IP address of your DP591 unit
•
MSK: The network mask
•
GWY: The gateway address
7 Configuring the network with front-panel
buttons
Use the front-panel navigation buttons to set either static IP address or use an automatic IP
assignment using the Dynamic Host Configuration Protocol (DHCP) server.
About this task
Default factory settings configure the DP591 unit to acquire an IP address via DHCP. Alternatively,
you can configure a static IP address.
Procedure
1. In the DP591 front panel, press the back button until the user-control screen displays the DP591
Settings menu.
2. Open the DP591 Settings > System Settings > IP Settings > Command Interface menu.
3. Configure the IP address of your unit.
Option
DHCP
Static IP address
Dolby DP591 Audio Encoder Quick Start Guide
20 August 2018
Steps
1. Open the Network Mode menu.
2. Press enter until the DHCP mode is selected.
3. Choose Apply to confirm the configuration.
1. Open the Static IP Settings menu.
2. Set these network addresses based on your configuration:
•
IP: The IP address of your DP591 unit
Checking the IP address
5