CYP CH-507TXWPBD Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Приймач CYP CH-507TXWPBD. CYP CH-507TXWPBD 16 сторінок. Hdmi over single cat5e/cat6
Також для CYP CH-507TXWPBD: Посібник з експлуатації (16 сторінок)
Друкувати сторінку
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter
1
IR 2 EXTENDER: This slot is to connect with the IR receiver cable
included in the package for IR signal receiving.
2
DC 24V: Connect the power adaptor included in the package
and then connect to AC power to activate the device.
3
IR 1 BLASTER: This slot is to connect with the IR blaster cable
included in the package for IR signal transmitting.
4
RS-232 IN: This slot is to connect with D-Sub 9-pin cable from
PC/loptop device RS-232 commands sending.
5
LAN: Connect to an active network for LAN serving and Telnet/
Web GUI control.
When the transmitter or any compatible LAN equipped receivers
are connected to a network, this allows the network access
(including internet access if available) to be shared between the
transmitter and all connected receivers. Connect any Ethernet
equipped device e.g. a Smart TV or games console to the LAN
port of a receiver for that device to share the network/internet
access.
3
1
2
IR 2
EXTENDER
IR 1
BLASTER
RS-232
IN
3
4
DC 24V
LAN
HDMI IN
5
6
LINK
POWER
7
8