CYP PUV-1810RX-AVLC Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Приймач CYP PUV-1810RX-AVLC. CYP PUV-1810RX-AVLC 18 сторінок. 100m hdbaset hdr transmitter & receiver 4k, hdcp2.2, poh, lan, 18gbps
Друкувати сторінку
6.2 Transmitter's Rear Panel
1
DC 48V: Plug the 48V DC power adapter into this port and connect it to an AC
wall outlet for power.
2
IR1 BLASTER: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
3
IR2 EXTENDER: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
4
CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with a single
Cat.5e/6/7 cable for transmission of all data signals.
5
HDMI IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
6.3 Receiver's Front Panel
PUV-1810RX-AVLC
1
ISP: This button is reserved for factory use only.
2
STD/UPDATE: This switch is reserved for factory use only. The default
setting is "STD".
3
RS-232 OUT: Connect to a serial controllable device for the extension
of RS-232 signals.
4
LAN: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection.
5
SYNC LED: This LED will illuminate when a live input source is
detected.
HQ/STD LED: This LED will illuminate whenever the AVLC function is
IR1
IR2
DC 48V
BLASTER
EXTENDER
1
2
3
UPDATE
STD
1
2
3
CAT5e/6/7 OUT
HDMI IN
4
5
HQ/STD
4
5
9