CYP CH-1109TXC Посібник з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Подовжувач CYP CH-1109TXC. CYP CH-1109TXC 18 сторінок. Hdmi to cat5e/6 with lan/poe/ir extender
Також для CYP CH-1109TXC: Посібник з експлуатації (13 сторінок)
Друкувати сторінку
6.2 Receiver
Front
Power
IR 1
IR 2
Extender Blaster
1
2
3
Power LED
1
The red LED will illuminate when the 24 V DC Adaptor is connected
to the AC outlet.
IR 1 Extender
2
These slots are to connect with the IR receiver cables included in
the package for IR signal reception.
IR 2 Blaster
3
Connect the IR blaster cables included in the package for IR signal
transmission.
4
RS-232 Out
Connect to a device that can be controlled (via D-Sub 9-pin
female cable) by RS-232 commands.
5
Link LED
This yellow LED will illuminate when the both CAT5e/6 input and
output signals are connected.
CAT5e/6 IN
6
Connect the transmitter and receiver via a single CAT5e/6 type
cable for all data transmission.
HDMI Out
7
Connect to a HDMI equipped TV or monitor to display the HDMI
input source signal.
LAN 1/2/3
8
The LAN connections can be used to connect and share up to
6 ethernet connections (3 at the reciver end, 3 at the transmitter
end), including computers, routers and media servers.
10
Link
RS232 Out
CAT5e/6 In
4
5
6
Rear
HDMI Out
LAN 1
7
8
LAN 2
LAN 3
8
8