CYP CH-1602RX Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Подовжувач CYP CH-1602RX. CYP CH-1602RX 15 сторінок. Hdmi over hdbaset transmitter and receiver with optical audio return (oar)
Також для CYP CH-1602RX: Посібник з експлуатації (16 сторінок)

Друкувати сторінку
CYP CH-1602RX Посібник з експлуатації

6.2 Transmitter Left and Right Panels

Left
CAT5e/6/7 OUT
1
CAT5e/6/7 OUT: Connect to the Receiver unit with a single
1
CAT5e/6/7 cable for transmission of all data signals. Under proper
connection the green LED will illuminate to indicate PoE activated.
The yellow LED will illuminate to indicate successful connection
between Transmitter and Receiver, when it blink irregularly it
represent the link error or when not illuminate it means no link with
Reciever.
2
LAN: Connect to an internet or network connection. The yellow LED
will illuminate to represent the link with Receiver is steady, when
it blink irregularly it represent the link error or when not illuminate
it means no link with Receiver. The green LED will illuminate to
represent the Ethernet speed is with 100Mbit/s.
3
OPT. OUT: Connect to speaker with coaxial input for audio signal
output from Receiver's OPTICAL IN.
4
ARC OUT OFF/ON SWITCH: Switch this dip switch to allows ARC
(Audio Return Channel) function to be activate or not. Switch to
OFF to disable ARC function. Switch to ON allows Receiver's HDMI
output audio to be routed back and output to both HDMI IN and
Optical OUT on the transmitter side.
Note: When ARC switch to ON, depending on the connected
devices of the HDMI OUT & Optical in, the ARC input/output
transmission distance may be varied. It is suggested to use cable
within 2 meters long to ensure the best audio quality.
5
HDMI IN: Connect to HDMI source equipment such as a DVD or
Blu-ray player.
Right
OPT.
ARC OUT
LAN
OUT
OFF ON
2
3
4
HDMI IN
5
4