CYP CH-526RXPL Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кабелі та роз'єми CYP CH-526RXPL. CYP CH-526RXPL 16 сторінок. Hdmi splitter with audio over cat5e/6/7 receiver
Друкувати сторінку
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 24V
POWER
1
2
Power LED: This LED will illuminate when the device is connected to
1
a power supply.
2
DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the PoC
function.
4
CAT5e/6/7 IN: Connect from the Transmitter unit with a Single
CAT5e/6 cable for receiving all data signals.
5
IR IN: Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct line-
of-sight of the IR Extender.
6
IR OUT: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
USB: This port is reserved for firmware update only.
7
3
CAT5e/6/7 IN
IR 1
IN
3
4
IR 2
OUT
USB
5
6