CYP CLUX-12E Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кабелі та роз'єми CYP CLUX-12E. CYP CLUX-12E 8 сторінок. 1x2 hdmi 1.3
Друкувати сторінку
1. Introduction
The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to
HDMI signal distribution. Each product in this series is compatible with HDMI v1.3
specifications, a cutting-edge technology which defines the supports to
transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a
high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the
HDMI v1.3 DA series also does signal amplification and equalization, so as to
provide high performance I/O of audio and video.
2. Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
Deep color video up to 12bit, 1080p@(24/60)Hz.
One HDMI source which connect up to two HDMI displays simultaneously.
HDCP keysets allows each output to work independently when connecting
to a HDMI display.
Splits a HDMI source up to two outputs without signal loss.
Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions, from VGA to UXGA and
480i to 1080p.
HDMI cable distance test with 1080p/8bits resolution the Input/Output
distance can run up to 15/15 meters. with 1080p/12bits the Input/Output
distance can run up to 10/15 meters.
Supports EDID functionality. The unit will detect the first HDMI/DVI output
source's EDID and record in the unit. If the first detected output source is
empty it will pass to next source, until the first HDMI/DVI been detected.
When users reconnect all the output sources or re-plug the power
source,the system will automatically recover the EDID.
Supports xvYCC.
Supports CEC bypass.
1