CYP CLUX-14E Посібник з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кабелі та роз'єми CYP CLUX-14E. CYP CLUX-14E 8 сторінок. 1x4 hdmi 1.3 splitter

1. Introduction

The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to

HDMI signal distribution. Each product in this series is compatible with HDMI v1.3

specifications, a cutting-edge technology which defines the supports to

transfer Deep Color (10-bit and 12-bit) video and new lossless compressed

(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a

high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the

HDMI v1.3 DA series also does signal amplification and equalization, so as to

provide high performance I/O of audio and video.

HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.



Deep color video up which 12bit, 1080p@(24/60)Hz.



One HDMI source to connect up to four HDMI displays simultaneously.



HDCP keysets allows each output to work independently when connecting



to a HDMI display.

Splits a HDMI source up to four outputs without signal loss.



Supports DVI source and DVI display by using HDMI to/from DVI adaptor



cable.

Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master

Audio transmission (32-192kHz Fs sample rate).

Supports a wide range of PC and HDTV resolutions from VGA to UXGA and



480i to 1080p.

HDMI cable distance test with 1080p/8bits resolution, the Input/Output



source can run up to 15/15 meters. If 1080p/12bits the Input/Output source

can run up to 10/15 meters.

Supports EDID functionality. The unit will detect the first HDMI/DVI output



source's EDID and record in the unit. If the first detected output source is

empty it will pass to next source, until the first HDMI/DVI been detected.

When users reconnect all the output sources or re-plug the power

source,the system will automatically recover the EDID.

Supports xvYCC.



Supports CEC bypass.

