CYP CLUX-16EN Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кабелі та роз'єми CYP CLUX-16EN. CYP CLUX-16EN 12 сторінок. 1 by 16 hdmi splitter
Також для CYP CLUX-16EN: Посібник з експлуатації (13 сторінок)
Друкувати сторінку6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
CLUX-16EN 1x16 SPLITTER
1
POWER LED: The power LED will illuminate when the unit is powered.
2
SYNC LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
6.2 Rear Panel
INPUT
OUTPUT
EDID
SERVICE
STD
TV
1 2 3
1
EDID STD/TV: The default factory setting is on TV, leave as it is when
the display is properly. The unit will detect the 1st HDMI output's
EDID and send out the signal accordingly to all other output ports.
This device obtain the last memory function therefore, the device
will use the last output port1's EDID when output port is not
connected to a display after every power cycling or switch in
between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID's video at 1080p@60Hz and audio at LPCM 2CH.
2
SERVICE: Manufacturer use only.
3
HDMI INPUT: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box.
4
HDMI OUTPUT
Connect each of the output ports to the HDMI display for
simultaneous HDMI distribution.
5
DC 5V: Connect the 5V DC power supply into the splitter and Plug
the adaptor to AC wall outlet.
POWER
SYNC
1 2
2
4
6
1
3
5
8
10
12
7
9
11
4
14
16
DC 5V
13
15
5
2