CYP CLUX-3D12S1A Посібник з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач CYP CLUX-3D12S1A. CYP CLUX-3D12S1A 16 сторінок. 1 x 2 hdmi splitter with 3d audio to amplifier
Друкувати сторінку
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI OUT 1
CLUX-3D12S1A HDMI SPLITTER
HDMI OUT 1 & 2
1
Connect each of the output ports to a HDMI equipped video
display such as TV or projector. HDMI OUT 1 is the master video
port and the device will send the video content according to that
connected display's EDID information. If more than one output is
connected, both HDMI OUT 1 and HDMI OUT 2 output identical
video signals simultaneously based on the EDID information of the
display connected to HDMI OUT 1.
HDMI OUT 3
2
Connect the HDMI audio output port to the AV Receiver. HDMI
OUT 3 is the master audio port and the device will send the audio
content according to the connected device's EDID information
to all HDMI outputs. Meanwhile, the display will show a blank BLUE
screen.
Note: A master port will replicate the highest resolution settings of
the connected device. Any device connected to a non-master
port that does not meet the master device's EDID settings there
may be no output from that port. For example, when the device
connected to HDMI OUT 3 supports 7.1CH audio but OUT 1 & 2
supports only 2CH, then there will be no audio output from the
HDMI OUT 1 and HDMI OUT 2 ports.
Similarly, when a 3D capable display is connected to HDMI OUT 1
and a non-3D capable display is connected to HDMI OUT 2 there
may be no video displayed on the device connected to HDMI
OUT 2 when 3D video is playing.
3
HDMI OUT 2
1
HDMI OUT 3
AUDIO
2