CYP QU-14S Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач CYP QU-14S. CYP QU-14S 8 сторінок. 1 to 4 hdmi distribution amplifier
Також для CYP QU-14S: Посібник з експлуатації (10 сторінок), Посібник з експлуатації (16 сторінок)

Друкувати сторінку

3.2 Rear Panel

HDMI IN

EDID

STD

1. EDID Control Switch: Default setting is TV (downstream). In this mode the

QU-18S will search all output ports (starting at output 1) for the highest

video/audio settings connected to each of the outputs. The detection priority

of the matrix is v1.3 HDMI, v1.2 HDMI, DVI. Switch to STD (fixed EDID) if

you have any issues with the default setting (TV). When switching to STD,

please ensure that the unit is powered OFF, then ON again, for the setting to

be made. By changing to STD, this will force the source to be configured as

standard stereo (PCM) Audio and initiate a search for a common compatible

video resolution.

2. HDMI Input: Connect input port to the HDMI or DVI output of your source

equipment such as a Blu-Ray player or set-top box.

3. HDMI Outputs 1 to 8: Connect each of the output ports to the HDMI display.

When more than one output is connected, the HDMI outputs play an identical

video signal simultaniously.

4. POWER: Plug the 5V DC power supply into the splitter and connect the

adaptor to the AC wall socket.

HDMI OUT

Page 3

DC 5V