Dolgin DC-7200 Series Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Конвертер мультимедіа Dolgin DC-7200 Series. Dolgin DC-7200 Series 2 сторінки. Dc converter

Друкувати сторінку

The step-down voltage converter reduces voltage from a 9-25V DC power source down

to 7.2-7.4V. The LED voltage indicator helps in monitoring the battery status.*

1. Plug the camera DC cord into the output jack.

2. Connect the converter to the DC power source using either 4-pin XLR connector or the DC

jack.

3. Operate the camera in the usual manner.

4. Periodically monitor the DC Converter's LED.

The 4-pin jack is provided for powering the camera from any external 9-25V DC power source.

The power source should be capable of delivering up to 20W (approx.)

Pin 1 GND

Pin 4 (+)

* Status LED (monitoring a 14.4V battery)

•

LED ON

•

Blinking 3 times

•

Blinking 2 times

•

Blinking 1 time

•

Blinking 1 time fast

•

To extend batteries service life avoid running them down to the discharged level

Each DOLGIN ENGINEERING product is built to exacting standards and subject to extensive

testing prior to shipment.

DOLGIN ENGINEERING products are guaranteed for a period of 2 years from the date of

purchase.

This warranty covers only defects in materials or manufacturing and does not cover damage

caused by misapplication, modification, abuse, or tampering. Equipment which has been

damaged, has parts missing, or is beyond the warranty period is subject to full factory repair

charges. No liability is assumed for any special, incidental, or consequential damages including

but not limited personal injury and property damage, with the sole exception of other than product

repair or replacement. No other warranty, written, oral, or implied is assumed or extended by

DOLGIN ENGINEERING. Product may be repaired or replaced at factory option. This warranty

may contain exclusions or give you additional rights, which may vary from state to state.

Should you require technical assistance, please contact

DOLGIN ENGINEERING at (781) 863-1813

Introduction

Operation

4-PIN XLR Power Jack

POLARITY

Battery is fully charged

Battery is at or below approximately 75% charge level

Battery is at or below approximately 50% charge level

Battery is at or below approximately 25% charge level

Battery is discharged *

LIMITED WARRANTY