Acquisitions X-FIRE 1200 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Внутрішній камін Acquisitions X-FIRE 1200. Acquisitions X-FIRE 1200 15 сторінок.

Cleaning and Maintenance

Annual Servicing

Your X-FIRE 1200 Decorative Gas Fireplace requires that annual service

checks be carried out by a Registered Installer to ensure that it will continue to

operate in a safe manner.

Please ensure that you schedule annual service checks for your X-FIRE 1200

with your local Registered Installer or service agent.

Removing the

Ensure the fascia is allowed to cool before handling.

The X-FIRE 1200 fascia attaches to the fire by four hooks. To remove the

fascia, simply lift it upwards 15-20mm, and pull towards you. Care should

always be taken when handling the fascia.

To replace the fascia, line up the four hooks with the matching receptacles on

the fire and push the fascia into place and let it drop down, the fascia should

now be securely in position

Removing the

Ensure the X-FIRE 1200 is allowed to cool before continuing with the following

procedure.

Pull the four hooks shown below towards you and then away from the glass

to release the glass frame underneath the hook.

Lift the glass assembly towards you to clear the locating supports and

place it flat upon some newspaper or a sheet of cardboard to protect your

floor coverings.

X-FIRE 1200

Fascia

X-FIRE 1200

Glass Assembly

X-FIRE 1200