Cypress CM-393 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Конвертер мультимедіа Cypress CM-393. Cypress CM-393 7 сторінок. Cypress scart/video to hdmi scaler box
Друкувати сторінку
Picture Adjust
When Picture Adjust is selected a sub menu as below appears.
BRIGHT
CONTRAST
COLOR
TINT
SHARP
RESET
EXIT
USE +,- to move the tick (V) to your desired adjust item, Press the Menu/Enter
to confirm your selection.
At this point, the selected parameter will turn red, and you can use +,- to increase
or decrease the value of the parameter.
When adjustment is complete, Press "Menu" to leave the parameter. Move the tick "V"
to "Exit", then press menu/enter to exit.
Output Setup
When Output Set up is selected a submenu as below appears:
Output Setup
Timing XGA
Exit
Press the " MENU/ENTER" button to enter into output timing select mode.
Press +,- to toggle through a variety of output resolutions as below.
Once your desired resolution is selected. press the Menu/Enter
to enter the resolution. The output picture will be adjusted to your newly
selected resolution.
Note: 1. All PC output resolution has 60 Hz vertical rate.
2. Vertical rate of 480p and 576p output is 60 Hz and 50 Hz respectively.
3. The vertical rate of 720p and pseudo 1080i(540p) can be 50 or 60 Hz
depending on the vertical rate of their respective video input.
4. - The outpu t signal format for the 5 PC resolutions (VGA~SVGA) is HDMI RGBHV.
- The output signal format for the 4 HD resolution (*480p~pseudo1080i) is
HDMI YPbPr.
5. Since CM-393's pseudo 1080i output is actually a 540P resolution
(960x540p) it may not be accepted by many HDMI TVs due to its pixel
clock is only half the real 1080i.
Default
Range
32
0-64
32
0-64
32
0-64
16
0-32
03
0-8
VGA
SVGA
XGA
WXGA
SXGA
480p
576p
720p
Pseudo 1080i
Vertical rate
Resolution
640x480
800x600
1024x768
1280x768
1280x1024
720x480
720x576
1280x720
960x540p
4
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
50Hz
50/60Hz
50/60Hz