Cypress CP-251F Посібник з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Конвертер мультимедіа Cypress CP-251F. Cypress CP-251F 16 сторінок. Cv/sv/pc/hd/hdmi 1080p scaler box
Також для Cypress CP-251F: Посібник з експлуатації (8 сторінок)

Друкувати сторінку

1. HDMI OUT and CO-AX OUT:

Connect the HDMI OUT port to the HDMI input port of your display such

as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input

port of your ampliﬁer for separate digital audio output.

2. AUX IN Input:

When the video signal input through the HDMI IN port is from a DVI

source such as a PC, use the AUX IN port to input the audio signal.

3. HDMI IN Input:

Connect the HDMI IN port to the HDMI output port of your source

equipment such as DVD player or Set-Top-Box. Or, use HDMI to DVI

cable to connect to the DVI output of your PC.

4. RS-232:

The port is for ﬁrmware update only.

5. PC IN for Video and Audio Input:

Connect the PC IN D-Sub (15-pin) port to the D-Sub output port of your

PC. And, connect the PC IN 3.5mm phone jack to the audio output

port of your PC.

6. Y Pb/Cb Pr/Cr Video and L/R Audio Input:

Connect the Y Pb/Cb Pr/Cr (Component) 3 RCA input ports to the

Component output port of your video source equipment such as DVD

player or Set-Top-Box. And, connect the L/R audio input ports to the

audio output port of your audio source equipment.

7. CO-AX Input:

The CO-AX port provides the digital audio input support, and can be

used to combine with each video input signals from CV/SV/COMP/PC/

HDMI ports. Once connected, please use the Audio Source Selection

in the OSD menu to select between Coaxial (S/PDIF) or other audio

source (see section " 4.3 OSD Operation " for reference.)

8. Composite Video / S-Video and L/R Audio Input:

Connect the Composite or S-Video input port to the Composite or

S-Video output port of your video source equipment such as DVD

player or Set-Top-Box. And, connect the L/R audio input ports to the

audio output port of your audio source equipment.

9. Power:

Plug the 5VDC power supply into the unit and connect the adaptor to

AC wall outlet.