Ashly LX-308B Технічні примітки та специфікації - Сторінка 2

Переглянути онлайн або завантажити pdf Технічні примітки та специфікації для Музичний мікшер Ashly LX-308B. Ashly LX-308B 2 сторінки. Stereo line/microphone mixer
Також для Ashly LX-308B: Посібник з експлуатації (16 сторінок), Посібник з експлуатації (12 сторінок), Посібник з експлуатації (8 сторінок)

Друкувати сторінку
Specifications LX-308B
THD:
IMD (SMPTE):
HUM & NOISE:
FREQUENCY RESPONSE:
VOLTAGE GAIN:
CROSSTALK:
VU METERS:
PEAK INDICATORS:
POWER REQUIREMENTS:
DIMENSIONS:
SHIPPING WEIGHT:
Input Specifications: (unless otherwise stated, specification conditions are 150Ω source, all levels nominal, outputs into 2.7KΩ or greater)
INPUT
BALANCED/
UNBALANCED
LINE INPUTS
(1-2)
Balanced
(3-8)
Balanced
MIC INPUTS
(1-2)
Balanced
SUB INPUTS
(L,R)
Unbalanced
Output Specifications:
INPUT
BALANCED/
UNBALANCED
MASTER OUT
(L,R)
Servo-Balanced
MONO OUT
SUB OUT
(L, R)
Unbalanced
Notes:
1. 0 dBu = 0.775 Vrms 2. Sensitivity is input signal level which will produce +4dBu out with all levels maximum
Rear Panel LX-308B
Applications:
Broadcast Studios, Mobile Broadcast Units, Satellite Downlink Distribution, Boardroom Sound Systems,
Multimedia Sound Distribution, Concert Sound, Dance/Night Clubs, Bowling Alleys, Churches, Auditoriums,
Lecture Halls, Sports Stadiums, Outdoor Festivals.
Ashly manufactures a complete and comprehensive line of Analog and Digital Signal Processors, Power
Amplifiers, Mixers, and Amplifier Input Options. Please call, write or visit our web site for information on
< .02 % at +20dBu, 20Hz-20KHz
< .01 % at +20dBu
(20 Hz-20 KHz noise bandwidth):
< -98dBu residual output noise, all levels at minimum
< -90dBu MASTER OUT, MASTER LEVEL and one INPUT LEVEL at nominal (unity gain)
± 0.2dB 20Hz-20KHz
0.0 ±1dB —CH. INPUTS or SUB INPUTS to MASTER OUTPUTS, levels at nominal
25 ± 1dB —CH. INPUT to MASTER OUTPUTS, levels at maximum
56 ± 1dB —CH. 1 or 2 INPUT in MIC position to MASTER OUTPUTS
18 ± 1dB —SUB INPUTS to MASTER OUTPUTS, MASTER LEVEL at maximum
< -80dB adjacent inputs or input to output at 1KHz; < -60dB adjacent inputs
or input to output at 20KHz
Two 6-segment LED meters. 0VU = +4dBu
Left and right peak CLIP indicators illuminate when any internal
signal amplifier is 3dB below clipping
100 -240VAC, 50-60Hz, 12 watts
19" L x 1.75" H x 8.0" D
13 lbs. maximum
LOAD
FOR USE WITH
IMPEDANCE
NOMINAL
> 20KΩ
600Ω
> 20KΩ
600Ω
> 20KΩ
600Ω
> 10KΩ
600Ω
LOAD
FOR USE WITH
IMPEDANCE
NOMINAL
< 200Ω
10KΩ lines
< 200Ω
10KΩ lines
any of these Ashly Products.
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103
Toll Free (800) 828-6308, Tel: (585) 872-0010, Fax: (585) 872-0739
www.ashly.com, e-mail: [email protected]
MAX. INPUT LEVEL
BEFORE CLIP
+21dBu
+21dBu
-10dBu
+22dBu
OUTPUT LEVEL
NOMINAL
MAX BEFORE CLIP
+4dBu
+22dBu
-4dBu
+22dBu
CONNECTOR
Left & Right 1/4" Phone Jacks
Left & Right 1/4" Phone Jacks
Left & Right 1/4" Phone Jacks
Left & Right 1/4" Phone Jacks
CONNECTOR
1/4" Phone Jacks
1/4" Phone Jacks