Ashly MX-406 Посібник з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музичний мікшер Ashly MX-406. Ashly MX-406 12 сторінок. Stereo microphone/line mixer
Також для Ashly MX-406: Посібник з експлуатації (12 сторінок), Технічні примітки та специфікації (2 сторінок), Посібник з експлуатації (12 сторінок), Посібник з експлуатації (16 сторінок)

7.2 Meeting Room, Board Room, or Church Mixer Using Remote Control:

In this illustration, the MX-406 is interfaced with an Ashly VCM-88 eight channel remote level controller, allowing

the mixer to be operated from a distance by a non-technical person . Remote control of the VCM-88 is achieved through the use

of Ashly's RD-8 desk-top remote controller, RW-8 wall-plate version, or PC control using Protea System Software . The RD-8

and RW-8 use a single mic cable for control data, while PC control uses RS-232 serial communications . Remote control can

be located up to 1,300 feet from the main audio equipment rack .

8. TROUBLESHOOTING TIPS

8.1 No Sound

Check the AC power . Is the power switch on? Check the level meters . If they are operating, the problem is between

the mixer and the later components in the system . If there is no meter activity, check to see that you really have an input signal

and that it is on the desired channel .

8.2 Distorted Sound

Something is being overdriven in the signal path . If the clip indicators are active, reduce the channel gain and/or press

in the pad switch on the rear panel . There are many gain adjustments in the mixer itself and probably several others in other

system components which makes it possible to overdrive an input section and then incorrectly try to reduce the gain of the

output section . The best way to approach setting gains is to establish the operating level of input stages first by setting their

gain as high as possible but leaving about 20dB of headroom for loud peaks, then move on to set the master gain to produce a

good meter reading . Proceed to set the gain of equalizers, limiters, crossovers, and amplifiers following the mixer in the same

manner, always working toward the later stages of the system .

Operating Manual - MX-406 Stereo Microphone/Line Mixer