Ashly GQX-3102 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Обладнання для запису Ashly GQX-3102. Ashly GQX-3102 12 сторінок. Graphic equalizer
Також для Ashly GQX-3102: Посібник з експлуатації (16 сторінок), Технічні примітки та специфікації (2 сторінок), Посібник з експлуатації (13 сторінок)

Operator Manual – GQX Series Equalizers

GQX equalizers use "Q" enhanced Wein bridge filters and interleaved summing for constant

"Q", low ripple, and minimum filter interaction. A servo-balanced output stage simulates a

true transformer output to allow interfacing with virtually any type of load.

GQX equalizers have with three different connector types:

1/4" inch stereo phone jacks

Three pin XLR type connectors

Euroblocks

These three connectors facilitate interfacing to most professional audio products. Inputs as

well as servo-balanced outputs can be used balanced or unbalanced

Your GQX series equalizer is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock Connector

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your GQX unit

may eliminate the noise.

GQX Connector Polarities

Page - 5

Safety Instructions – 3

Introduction - 4

GQX Equalizers – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11