Ashly Protea 24.24M Технічна специфікація - Сторінка 5
Переглянути онлайн або завантажити pdf Технічна специфікація для Комп'ютерне обладнання Ashly Protea 24.24M. Ashly Protea 24.24M 5 сторінок. Matrix processor
Друкувати сторінкуProtea 24.24M Matrix Processor
Specifi cations
Input: Active Balanced, 18 kohms
Max Input Level: +20 dBu
Input Gain Range: -50dB to +12dB, selectable polarity
Output: Active Servo Balanced, 112 ohms
Max Output Level: +20 dBu
Output Gain Range: -50dB to +12dB, selectable polarity
Frequency Response: 20 Hz-20kHz, ±0.25 dB
THD: <0.01% @1 kHz, +20 dBu
Dynamic Range: >110 dB (20 Hz-20 kHz) unweighted
Output Noise: <-90 dBu unweighted
Mic Preamp
Gain: 0dB, +40dB, +60dB
Phantom Power: +48VDC (9.6ma/input)
EIN: -128dBu, 20-20KHz, 50 ohm source
Eq Filters
Number: 15 per Input, 15 per Output
Selectable As:
Parametric
Bandwidth: 1/64th Octave to 4 Octave
Range: +15/-30dB, 0.1 dB increments
Frequency Resolution: 1Hz
Low-Shelf
Slope: Selectable 6 or 12dB/Octave
Frequency Range: 20Hz to 2KHz
Range: +/-15dB, 0.1dB increments
High-Shelf
Slope: Selectable 6 or 12dB/Octave
Frequency Range: 3.886KHz to 20KHz
Range: +/-15 dB, 0.1 dB increments
All-Pass
Type: Second-Order (-180 degrees)
Frequency Range: 20Hz to 20KHz
Crossover Filters
High Pass Filter
Type: Linkwitz-Riley, Bessel, Butterworth
Slope: 12, 18, 24 and 48dB/Octave
Frequency Range: Off to 20KHz, 1Hz increments
Low Pass Filter
Type: Linkwitz-Riley, Bessel, Butterworth
Slope: 12, 18, 24 and 48dB/Octave
Frequency Range: Off to 20KHz, 1Hz increments
Delay
Input Maximum Delay: 682.5ms
Increment: 20µs
Output Maximum Delay: 682.5ms
Increment: 20µs
More information about the Protea 24.24M Matrix Processor can be found on our web site - www.ashly.com
Specifications and features are subject to improvement or change without notice
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739
Internet: http://www.ashly.com, email: [email protected]
Gate
Threshold: -80 to +20dBu, 1dBu increments
Floor: Off, -80 to 0dBu, 1dBu increments
Attack: .2, .5, 1, 2, 5, 10, 20, 50ms/dB
Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Autoleveler
Basic Screen
Target Level: -40 to +20dBu, 1dBu increments
Action:
Aggressive/ Ratio 10:1, Hold Time 0 sec, Gain Incr. Rate 20 ms/dB,
Gain Dec. Rate 5 ms/dB
Normal/ Ratio 4:1, Hold Time 1 sec, Gain Incr. Rate 50 ms/dB, Gain
Dec. Rate 10 ms/dB
Gentle/ Ratio 2:1, Hold Time 2 sec, Gain Incr. Rate 100 ms/dB, Gain
Dec. Rate 20 ms/dB
Maximum Gain: 0dB to 22dB, 1dB increments
Advanced Screen
Target Level: -40 to +20dBu, 1dBu increments
Ratio: 1.2:1, 1.5:1, 2:1, 3:1, 4:1, 6:1, 10:1
Hold Time: 0, 1, 2,3, 4, 5, 6Sec
Threshold Below Target: -30 to 0dB, 1dB increments
Gain Increase Rate: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Gain Decrease Rate: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Ducker
Trigger Threshold: -80 to +20dBu, 1dBu increments
Ducker Depth: Off, -30 to 0dBu, 1dBu increments
Ducker Release: 5, 10, 20 50, 100, 200, 500, 1000ms/dB
Cross Point Mixer
Gain: Inf., -50 to +12dB, 1dB increments with Mute
Compressor/Limiter
Threshold: -20dBu to +20dBu, 1dB increments
Ratio: 1.2 :1 to Infinity (1.2, 1.5, 2., 3, 4, 6, 10, 20, Infinite:1)
Attack: 0.5 ms to 50 ms per dB
Release: 10 ms to 1 sec. per dB
Processor
Input A/D: 24 bit
Output D/A: 24 bit
Processors: 24 bit signal, 48 bit filters, 56 bit accumulator
Sample Rate: 48 kHz
Propagation Delay: 1.46 ms
Other
Power Requirements: 90 - 240VAC, 40W
Shipping Weight: 13lbs (Maximum)
Dimensions: 19.0"L x 3.5"H x 8.5"D
Connections: Euroblock
Environmental: 40-120 deg. F, (4-49 deg, C) noncondensing