Dolphin Charger 12V25A Посібник користувача з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача з експлуатації для Зарядний пристрій Dolphin Charger 12V25A. Dolphin Charger 12V25A 14 сторінок. Automatic ip65 battery chargers
Друкувати сторінку
WARNING
Connections
According to the model, the charger is set to be
connected to a monophase network 230V 50Hz or
115V 60Hz (refer with technical specifications).
The installation to which the charger is connected
must comply with the standards currently enforced in
the country of use.
In order to protect the occupants, the main power
supply access must be attached to a differential
circuit breaker (refer with technical specifications).
For safety reason, the green / yellow wire of the
power cord must strictly be connected to the earth of
the installation.
The cable N°1 of power cord must be connected to
the LINE or PHASE, the N°2 to the NEUTRAL.
To prevent overheating, ensure the correct tightening
of the connections.
Each access connected to the battery is protected
with a sealed fuse integrated with the wire. Do not
remove or change those fuses.
Output batteries must be connected to the charger
before its power-on.
This device complies with enforced standards
regarding emitted interferences and disturbances of
external origin.
Regarding electromagnetic interferences, ensure that
other materials used are compatible with this device
in order to avoid irreversible damage.